Miele K 841i Operating And Installation Manual page 24

Repairs to electrical appliances
should only be carried out by a
suitably qualified and competent
person in accordance with local and
national safety regulations.
Unauthorised repairs could be
dangerous.
The following can be corrected without
contacting the Miele Service
Department.:
^ Check to see whether any pieces of
furniture next to the appliance are
vibrating whilst the appliance is in
operation.
Switch the appliance off then:
^ Check whether the appliance is
aligned correctly.
^ Check whether all parts at the rear of
the appliance are free from
hindrance. Remove any hindrance.
^ Check whether the cable clips were
unclipped from the back of the
appliance before installation. They
could vibrate when the appliance is
operating.
^ Are all removable parts securely
located in the appliance?
^ Are bottles or containers touching
each other?
24
Remember that the noise of the
compressor and the coolant circulating
in the system is unavoidable.
^ Make sure that the temperature dial is
not pointing to the "0" position.
^ Check that the plug is correctly
inserted in the socket.
^ Check that the fuse is not defective
and that the mains fuse has not
blown. If it has, contact the Miele
Service Department.
^ Turn the temperature dial to a setting
closer to "0".
^ Check that the freezer compartment
door is closed properly.
^ Has a large amount of fresh food
been put in at once for freezing?
This makes the compressor run for
longer causing the temperature in the
refrigerator to fall automatically. No
more that 2 kg of fresh food should
be frozen at one time.
^ The super cool function has not been
switched off. The indicator light is still
on.