Delay start (19)
The starting time of a programme can
be delayed, e.g. to benefit from econ-
omy rates of electricity. A delay start
time of between 30 minutes and 24
hours can be selected.
With a delay start time of between 30
minutes and 9 hours 30 minutes the de-
lay is set in 30 minute stages. For 10
hours or more it is set in one hour
stages.
^ Switch the dishwasher on using the
"On/Off" button (15).
^ All the programme button indicator
lights will light up and the "Start/Stop"
indicator light will flash.
^ Press button (16) for the programme
you want.
The indicator light next to the
programme selected will light up and
the "Start/Stop" indicator light will start
flashing.
The running time of the programme se-
lected appears in the time display (18)
in hours and minutes, and the "Time
left" indicator light comes on.
Operating the dishwasher
^ Press button & or $ (19).
The last delay start time used will show
in the time display (19). The "Time left"
indicator light will go out , the "Delay
start" indicator light will come on and
the "Start/Stop" indicator light will start
flashing.
^ Press the & or $ button (19), to
lengthen or shorten the delay start
time.
The "Top Solo" function can now be se-
lected (see previous page).
^ Press the "Start/Stop" button (21).
The "Start/Stop" indicator light will come
on.
The time starts counting down until the
programme start time. The delay time
counts down in 1 hour steps until the
delay start period has elapsed for delay
start periods of over 10 hours, and in
minutes for delay start periods of under
10 hours.
37