Miele G 698 Plus Operating Instructions Manual page 47

Problem
The indicator light
"Water inlet" lights up
and flashes alternately
The indicator light
"Water inlet" lights up
during the "Energy
save" programme.
Possible cause
The stopcock is closed.
The water inlet filter is
blocked.
The Waterproof system
has reacted.
The intake water has not
reached the required tem-
perature of 45 °C, the hot
water system may be over-
loaded (see "Programme
selection").
Problem solving guide
Remedy
Open the stopcock fully.
Before rectifying the prob-
lem you must:
– Press the "Start/Stop"
button for at least one
second.
All the programme button
indicator lights will light up.
– Switch the dishwasher
off using the "On/Off"
button.
then:
– Clean the water inlet fil-
ter, see "Solving prob-
lems".
Call the Miele Service De-
partment.
– Start the programme
again.
– If the indicator light co-
mes on again select a
different programme.
47