Installation - Hobs With Enclosed Hotplates - Miele H 310 Operating Instructions Manual

Installation - Hobs with enclosed hotplates

When installing a hob there may be a
wall at the back and a wall or tall unit at
one side. On the other side there must
not be a unit or wall which stands
higher than the hob.
Because of the heat given off, there
must be a minimum distance as fol-
lows:
– 50 mm between the worktop
cut-out and adjacent furniture,
e. g. tall unit.
– 50 mm between the back wall
and the worktop cut-out.
– Maintain the safety distance
between the hob and a cooker
hood above it as recommended
the manufacturer. Where no
figures are given, e.g. for a pot
or utensil hanging rail, the safety
distance must be at least 760 mm
for inflammable objects.
* building-in height
Prepare the worktop cut-out as
illustrated.
1
3
4
b
Sealing ring
c
Hob
d
Worktop
e
Clamps
f
Screw
Loosen the screws
Set the hob unit
and centre it.
Turn the screws
e
the clamps
d
the worktop
Check that the hob unit
on to the worktop.
2
5
f
.
c
into the cut-out
f
to the right, until
are firmly attached to
.
c
fits tightly
73