Showroom Programme; Factory Default Setting; To Close The "Settings J" Menu - Miele G 1830 Operating Instructions Manual

Settings menu J
Demo programme
For showrooms only
The dishwasher is fitted with three
demonstration programmes for
showroom use.
The "Demo programme" and "Demo in
continuous loop" programmes
demonstrate operation and functions.
Demo programme
–
This programme is started by
pressing any sensor pad. It will run
through once and then has to be
started again.
Demo in continuous loop
–
This programme will begin as soon
as you switch it on and then will play
in a continuous loop until you switch
it off.
Demo with sound
–
This programme activates the pumps
to demonstrate the sound of the
dishwasher.
Switching on a demo programme
^ Select the option you want and
OK
confirm with
^ Confirm
Switch demo programme
on? OK
with
^ Press any sensor pad to start the
Demo programme you have
selected.
^ To cancel it, press any sensor pad
and confirm with it with
84
:
:
:
.
OK
.
Switching off the Demo programme
^ Select the
Off
OK
with .
^ Confirm
Switch demo programme
off? OK
with
Factory default
If you have altered any settings from
the factory default, you can re-set them
back to the factory default settings.
^ Confirm the question
default settings?
^ Confirm the information message
settings reset to factory default.
OK
with .

To close the "Settings J" menu

Press the +C sensor pad to come out
of the "Settings J" menu and return to
the main menu.
option and confirm
Reset factory
OK
with .
All