Starting A Programme; Display - Miele G 1830 Operating Instructions Manual

You can now set the type of
dishwasher detergent. You can
choose normal detergent, liquid
detergent, 2 in 1 tabs or 3 in 1 tabs
(see "Settings menu J, Detergent
type").

Starting a programme

^ Select
Start
.
The programme cycle will begin.
A programme can only be cancelled
in the first few minutes. Otherwise
the programme must continue to the
end so that important programme
stages (e.g. reactivating the water
softener) are not omitted.
If you want to use the "In operation
lock" function, you can now lock the
dishwasher (see "Settings menu J").

Display

The duration of the programme
selected appears in hours and minutes
in the display before the programme
begins. During the programme the time
left until the end of the programme is
displayed.
The time displayed may vary with the
same programme. This is partly
because of the water inlet temperature
at each intake, and partly because of
the amount and soiling level of the
crockery.
When a programme is selected for the
first time, the display shows an average
time for a cold water intake.
The times shown in the programme
chart refer to standard test loads and
temperatures.
Each time a programme is run, the
electronic unit takes the new conditions
into account, and calculates the time
required.
Operation
37