General Problems - Miele G 1830 Operating Instructions Manual

General problems

Problem
The display is dark.
The buzzer sounds
during a programme.
The following fault
message appears in the
display:
Salt reservoir cover
Close the salt reservoir
The following fault
message appears in the
display:
Middle spray arm
blocked
or
Bottom spray arm
blocked
Possible cause
The display has
switched off
automatically to save
energy (Standby
mode).
The salt reservoir has
not been closed
properly.
Items are blocking the
path of the middle or
the bottom spray arm.
The middle or bottom
spray arm jets are
blocked.
Problem solving guide
Remedy
Press any sensor pad.
Stand-by comes to an end
(see "Settings menu J,
Standby").
– Close it.
If the salt reservoir has
opened during a programme
you must also:
– Switch the dishwasher off
and then back on again
with the On/Off sensor pad
s.
– Start the programme
again.
Open the dishwasher door
and rearrange the items
which are obstructing the
spray arm.
– Switch the dishwasher off
with the On/Off sensor pad
s.
Then:
– Clean the spray arm. See
"Cleaning and care".
51