Problem solving guide
With the aid of the following guide, faults in the performance of the appliance,
some of which may result from incorrect operation can be put right without
contacting the Service Department.
,
Repairs should only be carried out by a suitably qualified and trained
person in strict accordance with current local and national safety regulations.
Unauthorised or incorrect repairs could cause personal injury or damage to the
appliance.
Technical problems
Problem
The Start/Stop indicator
does not flash after the
dishwasher has been
switched on using the
On/Off button K.
The dishwasher stops
during a programme.
42
Possible cause
The appliance is not
plugged in.
The fuse has tripped.
The fuse has tripped.
Remedy
Insert the plug and switch
on at the socket.
Reset or replace the fuse.
(Minimum fuse rating -
see data plate).
Reset or replace the fuse.
(Minimum fuse rating -
see data plate).