Quick-Start (Programmable); Safety Lock - Miele M 625-45 EGR Operating Instructions Manual

Operation

Quick-Start (programmable)

Pressing the START /c button is
sufficient to set the appliance operating
on maximum power.
Three set times are stored in the
memory:
^ 30 secs: Press START /c once
^ 1 min: Press START /c twice
^ 2 mins: Press START /c three times
Pressing the START /c button four
times in succession will bring back the
first stored time, and so on.
Programming times
To alter the set times:
^ Use the START /c button to select
the relevant set time (press once,
twice or three times) and hold the
START /c button pressed in.
^ While holding the START button
pressed in, alter the time with the
time selector.
The altered programme runs when
the START /c button is released.
An interruption to the power supply
will cancel any altered programmed
times and they will need to be
entered again.
26

Safety lock

The safety lock prevents the appliance
being used by children, for example.
To activate the safety lock
^ Press and hold the ä button in until
an audible tone sounds and the key
symbol appears in the display:
The key symbol will go out after a short
time.
The key symbol reappears whenever
any button or one of the rotary selectors
is operated.
After an interruption to the mains
power supply, the safety lock will
need to re-activated.
To cancel the safety lock
^ Press the ä button again and hold it
pressed in until an audible tone
sounds.