Miele Imperial DWW 1250 Operating And Installation Manual page 24

– Hold the retaining plate C at a maxi-
mum distance of 415 mm from the
ceiling and use the two notches to
align it with the centre line. Mark the
position of the two drill holes.
– Drill two ø 8 mm holes into the wall ,
and press the S8 plugs into the
holes.
– Screw on retaining plate C with two
5 x 40 mm screws.
– Hang the vapour canopy on the
angle brackets on retaining plate A.
24
– Secure the vapour canopy using the
5 x 40 mm screws in both drill holes.