Changing A Halogen Lamp - Miele DA 5490 W Operating And Installation Manual

Changing a halogen lamp

^ Before any maintenance work is
carried out, disconnect the cooker
hood from the mains supply.
Ensure that:
– it is switched off at the isolator, or
– it is switched off at the wall
socket and the plug removed, or
– the fuse from the fused spur
connection unit is withdrawn, or
– the mains fuse is withdrawn, or
– the screw-out fuse is removed (in
countries where this is applicable).
,
Exercise caution when changing
halogen lamps. They get very hot
during use and remain hot for some
time after being switched off. Do not
touch the surface directly when
changing a lamp, as grease
particles from your fingers will
adhere to the surface and damage
it. Please follow the manufacturer's
instructions.
Cleaning and care
^ To access the halogen lamp, push
the lamp cover gently upwards. The
cover will open and can be pulled
down.
^ Pull the old halogen lamp out of the
connection socket and replace it with
a new one (20 W, G 4 fitting).
^ Push the cover back up and make
sure it clicks into place.
To close the lamp cover properly, it
must have been opened fully as
illustrated above.
19