2 part vacuum tube IMPORTANT ! Please check the contents of the carton are correct BEFORE assembling your new Flymo product. IF ANY PARTS ARE MISSING CONTACT:- Husqvarna UK Ltd. Customer Service Department direct Telephone : 0844 844 4558 If not used properly this product can be dangerous.
Page 3
3. Only use extension cables specifically designed for outdoor use. CONNECTORS IMPORTANT • Flymo connectors are suitable for use with 2 core cable only. Under no circumstances should these connectors be used for earthed products. • All Flymo connectors and cables are of splashproof construction.
Vacuum Assembly 1. Attach the Debris Bag Adaptor to the Debris Bag as illustrated in Pic A. 2. Attach the Debris Bag to the unit as illustrated in Pic B. 3. Assemble the two SuctionTube Halves and the Suction Tube Addaptor together as illustrated in Pic C, ensuring that they all click securely into position.
Page 5
Converting from Vacuum use to Blower use 1. Remove the Vacuum Tube as illustrated in Pic E. 2. Remove the Debris Bag as illustrated in Pic F. 3. Attach the blow tube to the product as illus- trated in Pic G, ensuring it clicks securely into position.
1. Form a loop in the mains cable (J1). 2. Push the loop through the slot (J2). 3. To secure, position the loop over the hook (J3). 4. Pull the cable back through the slot (J4). Cable Restraint How to Use WARNING The use of eye protection is recommended.
Page 7
Fails To Operate 1. Is the power turned on? 2. Is the Blow Tube, Impeller Guard, Suction Tube or Debris bag fitted correctly? 3. Check the fuse in the plug, if blown replace. 4. Fuse continues to blow? Immediately disconnect from the mains electricity supply and consult your local Approved Service Centre Poor Blowing 1.
Need help?
Do you have a question about the TWISTER 2500 and is the answer not in the manual?
Questions and answers