Advertisement
Pull the deflector plate out slightly.
Tilt the primary filter at the front down
slightly and pull it out towards the
front.
Insert the two holders on to the sides
of the light cover.
Secure the light cover using self-tap-
ping screws 3.5 x 9.5 mm.
Replace the primary filter:
Make sure that the
are at the front and facing up-
wards.
Fit the primary filter into the ex-
tended deflector plate from below
and hold it in position.
Push the filter gently upwards and
push the deflector plate in. The filter
will slide into the holders.
31
Hide quick links:
Advertisement
