Levelling The Machine - Miele WT 2679 WPM Operating Instructions Manual

Installation and connection

Levelling the machine

The machine must stand perfectly level
on all four feet to ensure safe and
proper operation.
Incorrect installation may increase
electricity and water consumption and
may cause the machine to move about.
False values may also show in the Load
and Detergent display.
The four adjustable screw feet are used
to level the machine. All four feet are
screwed in when the machine is
delivered.
66
^ Using the spanner supplied turn
counter nut 2 in a clockwise direction.
Then turn counter nut 2 together with
foot 1 to unscrew.
^ Use a spirit level to check the
machine is standing level.
^ Hold foot 1 securely with a pipe
wrench. Turn counter nut 2 again
using the spanner supplied until it
sits firmly up against the housing.
All four counternuts must sit firmly up
against the housing. Please also check
this for the feet which did not need
adjustment. Otherwise there is the
danger of the machine moving about.