Miele KM 417 Operating Instructions Manual page 18

Cleaning and care
18
Re-assemble the burner as follows
(see illustration):
^ Make sure that all the locating tabs
and notches line up exactly. Place
the burner head c on to the burner
base f so that the ignitor and the
ignition safety device extend through
their respective holes in the burner
head. The burner head must click
into place correctly.
^ Replace the burner cap b ensuring
that the locating tabs fit into the
notches in the burner head.
Important: replace parts in the correct
order after cleaning.
1. Do not replace the parts upside
down.
2. The locating tabs must fit exactly
into the notches.