Installing The Battery - Kyocera QCP 2035 Reference Manual

Installing the Battery

Before using your QCP 2035 phone, follow the steps below to install the battery.
1.
2.
3.
5
6.
Battery
Hold phone face down in palm with antenna pointing
down. Place thumb on ridges of battery door. Push down
with your thumb and slide door away from you until it stops
(about 1/2 inch).
Move thumb to side of phone, then slide door off of phone.
Place battery in the phone with metal contacts facing down
and towards the bottom of the phone.
4. If keypad is loose, lay keypad flat inside faceplate.
5
5. Align slots in phone to posts on faceplate, and close
until latched together.
4
Hold phone face down in one hand. Align battery door to
grooves on side of phone. Slide battery door on while
pressing down firmly, ensuring that battery door clicks into
place. Check and repeat if battery door is not aligned. Do
not force.
Installing the Battery
2