Countdown Timer; Stopwatch; Brick Attack - Kyocera QCP 2035 Reference Manual

Countdown Timer

Clears one function or one digit from the screen and returns the calculator to digit
entry mode. Hold down to clear all of the digits and operations and display a zero.
Exits the calculator and returns to the home screen.
Countdown Timer
This timer counts down for a specified amount of time. It beeps, using the volume
set for alerts, when that amount of time has elapsed.
1. Select Menu
2. Press
3. Press up or down to set the hours, minutes, and seconds. To move the cursor,
press
4. Select Start to begin the countdown.
5. Select Stop to pause the countdown.
6. When the alarm rings, press

Stopwatch

1. Select Menu
2. Select Start to have the stopwatch begin counting.
3. Select Stop to quit counting.
4. Select Reset to set the counter back to zero and have the stopwatch begin
counting again.
5. Press

Brick Attack

1. Select Menu
2. To start the game, press
3. To pause the game, press
The goal of this game is to eliminate bricks arranged in levels. To do this, you send
a moving ball upward using a paddle at the bottom of the screen. To move the
paddle, press
paused and exited. You can return to play once the incoming call alert is ended. The
game cannot be paused while the phone is off.
44
3 3
Tools Countdown Timer.
to Set.
left or right.
3 3
Tools Stopwatch.
when finished.
3 3
Tools Brick Attack.
to select New.
, then press
left or right. If an incoming call alert is received, the game is
to silence it.
to Resume.
Reference Guide for the QCP 2035 Phone