Coil Elements; Oven Cooking; Manual Clean Oven Electronic Control - Amana Electric Range - Coil Use And Care Manual

Coil Element Surface
Notes:
• Clean cooktop after each use.
• Wipe acidic or sugary spills as soon as the cooktop has
cooled as these spills may discolor or etch the porcelain.
To protect drip bowl finish:
• To lessen discoloration and crazing, avoid using high
heat for long periods.
• Do not use oversized cookware. Pans should not
extend more than 1-2 inches beyond the element.
• When home canning or cooking with big pots, use the
Canning Element (Model CE1). Contact your dealer for
details or call 1-877-232-6771 USA or 1-800-688-8408
Canada to order.
• Clean frequently. (See page 6.)

Coil Elements

• When an element is on, it will cycle on and off to maintain
the heat setting.

Oven Cooking

Manual Clean Oven Electronic
Control
(select models)
A B C
A Bake Use for baking and roasting.
B Broil Use for broiling and top browning.
C Timer Sets timer.
D Clock Use to set time-of-day clock.
E Cancel Cancels all operations except timer
and clock.
F More (▲) or Enters or changes time, oven
Less (▼) temperature. Sets HI or LO broil.
D E F
• Coil elements are self-cleaning. Do not immerse in water.
To remove:
When cool, raise
element. Carefully pull out and
away from receptacle.
To replace:
Insert element
terminals into receptacle. Guide
the element into place. Press
down on the outer edge of element
until it sits level on drip bowl.
Drip Bowls
The drip bowls under each surface element catch boilovers
and must always be used. Absence of drip bowls during
cooking may damage wiring.
To prevent the risk of electric shock or fire, never line drip
bowls with aluminum foil.
Drip bowls will discolor (blue/gold stains) or craze over time if
overheated. This discoloration or crazing is permanent. This
will not affect cooking performance.
Important: The display will show 12:00 when the appliance is
first connected to power or if power is interrupted. The Bake
and Broil indicators light when function is pressed.
Using the Touchpads
• Press the desired pad.
• Press the ▲ or ▼ pad to enter time or temperature.
• A beep will sound each time a function pad is pressed. There
is no beep for the ▲ or ▼ pad.
• A double beep will sound if a programming error occurs.
Important: Four seconds after pressing the ▲ or ▼pad, the
time or temperature will automatically be entered. If more
than 30 seconds elapse between touching a function pad
and the ▲ or ▼ pad, the function will be canceled and the
display will return to the previous display.
12
TERMINALS
Cont.