To Start your Lawnmower
(F)
The switchbox is provided with a lock-off button
(H1) to prevent accidental starting.
Always handle the blade with care - sharp edges
could cause injury. USE GLOVES. Never use
more than 3 Cutting Height Spacers for the
Turbo Lite 330 OR 4 Cutting Height Spacers for
the Turbo Lite 350/Turbo 400. Spacers must
only be fitted between the blade and the fan and
NEVER between the blade and the bolt.
REMOVING AND FITTING THE BLADE AND FAN
K1 - Blade Bolt
K2 - Blade
K3 - Spacers
K4 - Fan
Removing the Blade and Fan
•
Renew your metal blade after 50 hours
mowing or 2 years whichever is the sooner -
regardless of condition.
•
Your product is uniquely identified by a silver and black product rating label.
•
We strongly recommend that your product is serviced at least every twelve months, more often
in a professional application.
ENGLISH - 3
STARTING AND STOPPING
(D)
(E)
(G)
(H)
(H)
HOW TO MOW
J
ADJUSTING THE CUTTING HEIGHT
(L)
SERVICE RECOMMENDATIONS
•
NOTE
There are two start/stop levers fitted. Either
one can be used for starting the lawnmower.
•
IMPORTANT
Do not use the start/stop levers
intermittently
To Stop your Lawnmower
Do Not Overload Your Mower
Removing the Blade and Fan.
For a Lower Cut
For a Higher Cut
Blade and Fan.
Fitting the Blade and Fan
•
If the blade is cracked or damaged replace
it with a new one.
•
Never use a blade bolt if the insulated head
is damaged cracked or missing.
(M)
(G)
Fitting the
Figure M