Table of Contents
Advertisement
Remote Management Configuration
10.1 Remote Management Overview
Remote management allows you to determine which services/protocols can access which Prestige interface
(if any) from which computers.
You may manage your Prestige from a remote location via:
To disable remote management of a service, select Disable in the corresponding Server Access field.
You may only have one remote management session running at a time. The Prestige automatically
disconnects a remote management session of lower priority when another remote management session of
higher priority starts. The priorities for the different types of remote management sessions are as follows.
1. Telnet
2. HTTP
10.1.1 Remote Management Limitations
Remote management over LAN or WAN will not work when:
1. A filter in SMT menu 3.1 (LAN) or in menu 11.5 (WAN) is applied to block a Telnet, FTP or Web
service.
2. You have disabled that service in one of the remote management screens.
3. The IP address in the Secured Client IP field does not match the client IP address. If it does not
match, the Prestige will disconnect the session immediately.
4. There is already another remote management session with an equal or higher priority running. You
may only have one remote management session running at one time.
Remote Management Configuration
This chapter provides information on configuring remote management.
Internet (WAN only)
LAN only,
Prestige 660R ADSL 2+ Access Gateway
Chapter 10
ALL (LAN and WAN)
Neither (Disable).
10-1
Advertisement
Table of Contents
Troubleshooting
