Table of Contents
Advertisement
Prestige 660R ADSL 2+ Access Gateway
If you need to define filters, please read the Filter Set Configuration chapter first, then return to this menu to
define the filter sets.
16.2 Protocol Dependent Ethernet Setup
Depending on the protocols for your applications, you need to configure the respective Ethernet Setup, as
outlined below.
For TCP/IP Ethernet setup refer to the Internet Access Application chapter.
For bridging Ethernet setup refer to the Bridging Setup chapter.
16.3 TCP/IP Ethernet Setup and DHCP
Use menu 3.2 to configure your Prestige for TCP/IP.
To edit menu 3.2, enter 3 from the main menu to display Menu 3 — LAN Setup. When menu 3 appears,
press 2 and press [ENTER] to display Menu 3.2 — TCP/IP and DHCP Ethernet Setup, as shown next
16-2
Menu 3.1 - LAN Port Filter Setup
Input Filter Sets:
protocol filters=
device filters=
Output Filter Sets:
protocol filters=
device filters=
Press ENTER to Confirm or ESC to Cancel:
Figure 16-2 Menu 3.1 LAN Port Filter Setup
:
Menu 3 LAN Setup
Advertisement
Table of Contents
Troubleshooting
