Zoom RhythmTrak RT-323 Operation Manual page 45

• MIDI: When MIDI sync messages are received from an external component, the RT-323
functions accordingly. This allows for example operating the RT-323 in sync with the
tempo of an external MIDI sequencer.
Current setting
Note that if the "MIDI" setting is selected, the RT-323 will not perform pattern or song
playback unless MIDI sync messages are received.
G
Enable/disable output of data stored on MIDI track (MIDI TR)
This setting controls the output of data stored on the MIDI track via the [MIDI OUT] jack. (For
information about the MIDI track, see page 91). While the indication "MIDI TR" is shown on the
display, use the [L]/[M] keys to select one of the following settings.
Current setting
NO OUT: Data stored on MIDI track are not output via [MIDI OUT] jack or internal sound
source (default setting).
MIDI track
Ch 1 – 16
Song track
Pattern Pattern
OUT: Data stored on MIDI track are sent only to [MIDI OUT] jack.
MIDI track
Ch 1 – 16
Song track
Pattern Pattern
EX OUT: Among data stored on MIDI track, those matching the MIDI channel of internal
sound source are sent to internal sound source, and other data are sent to [MIDI OUT] jack.
Ch 1 – 8, 12 – 16
MIDI track
Ch 9 – 11
Song track
Pattern Pattern
When "THRU" or "EX THRU" is selected, no MIDI messages for hitting pads or playing
patterns are output via the [MIDI OUT] jack.
88
Ch 9
Ch 10
MIDI OUT
Ch 11
Pattern
Sound source
MIDI OUT
Ch 9
Ch 10
Ch 11
Pattern
Sound source
Ch 9
MIDI OUT
Ch 10
Ch 11
Pattern
Sound source
G
Assign program change number to drum kit (PC DRUM)
This item allows you to change the default program change numbers allocated to the drum kits.
While the indication "MIDI PC DRUM" is shown, press the [ENTER] key, and use the [VALUE]
dial to specify the drum kit number (00 - 127). Then use the
change number (001 - 128).
Program change number
When you have made the required settings, press the [EXIT] key.
For details on factory default settings, see the list at the end of this manual.
G
Assign program change number to bass program (PC BASS)
This item allows you to change the default program change numbers allocated to the bass
programs.
While the indication "MIDI PC BASS" is shown, press the [ENTER] key, and use the [VALUE]
dial to specify the bass program number (00 - 54). Then use the
change number (001 - 128).
Bass program number
Program change number
When you have made the required settings, press the [EXIT] key.
For details on factory default settings, see the list at the end of this manual.
keys to set the program
[L]/[M]
Drum kit number
keys to set the program
[L]/[M]
89