Copying A Song; Deleting A Song - Zoom RhythmTrak RT-323 Operation Manual

Copying Specific Measures
You can use measure units to copy a part of a song for which pattern information has been input.
This is useful for example to repeat parts of a song.
Copy
1 2 3 4 5 6 7 8
Pattern A Pattern A Pattern A Pattern B
1 2 3 4 5 6 7 8 9 10
Pattern A Pattern B Pattern A Pattern A Pattern B
In song mode, press the [G REC] key.
1
The [G REC] key lights up.
Press the [EDIT] key.
2
You can now specify the number of the first measure of the copy source.
Use the [VALUE] dial to specify the first measure number of the copy source, and
3
then press the [ENTER] key.
Use the [VALUE] dial to specify the last measure number of the copy source, and
4
then press the [ENTER] key.
Use the [VALUE] dial to specify the first measure number of the copy target.
5
If the copy target range exceeds the end of the song, the song duration is automatically
extended.
To execute the copy process, press the [ENTER] key.
6

Deleting a Song

You can delete the currently selected song, to return it to the empty condition.
In song mode, select the song you want to delete.
1
Press the [DELETE] key.
2
The following indication appears on the display.
68
Copy
1 2 3 4
Pattern A Pattern B
1 2 3 4 5 6 7 8
Pattern A Pattern B Pattern A Pattern B
First measure number
of copy source
Last measure number
of copy source
Copy target start position
measure number
To carry out the delete process, press the [ENTER] key. To cancel the process,
3
press the [EXIT] key.
When you carry out the delete process, the unit will return to the song mode with the empty
song selected.
When you delete a song, the song and MIDI track recording contents as well as the
patterns assigned to the pads are also deleted.

Copying a Song

The currently selected song can be copied to any other song.
In song mode, select the copy source song and press the [EDIT] key.
1
Use the [ ]/[ ] keys to bring up the indication "COPY?" on the display, and press
2
the [ENTER] key.
Copy source song
Use the [L]/[M] keys or the [VALUE] dial to specify the number of the copy target
3
song.
To execute the copy process, press the [ENTER] key. To cancel the process, press
4
the [EXIT] key.
When the copy is completed, the unit returns to the condition of step 1. To return to song
mode, press the [EXIT] key.
If there is a song already stored in the copy target number, its contents will be overwritten
by the new song.
Song Track Operation
The song tracks are special auxiliary tracks which are separate from the pattern information
recorded for that song. These allow you to record pad playing information. For example, you could
add some fill-in parts after you have finished a song.
A song in the RT-323 has three song tracks: drum A, drum B, and bass. The sound (drum kit/bass
program) used by each track is the same as for the drum A/drum B/bass pattern track.
You can also select an empty song where no pattern information is recorded, and record
on the song track. Later, you may add pattern information to such a song for which only
the song track is recorded.
Copy target song
69