Page 1
SRE 188 E MANUEL D'UTILISATION GEBRAUCHSANWEISUNG BRUGSANVISNING INSTRUCCIONES DE USO OPERATING MANUAL ISTRUZIONI D’USO > GEBRUIKSAANWIJZING INSTRUKCJI OBSŁUGI...
Page 2
AFAQ AFNOR CERTIFICATION 11, AVENUE FRANCIS DE PRESSENSE 93571 SAINT-DENIS LA PLAINE CEDEX FICHE INFORMATIVE La marque NF garantit la qualité de cet article suivant les normes françaises CHAUFFAGES MOBILES et Règles de certification A COMBUSTIBLE LIQUIDE de l’application NF 128 NF 128 02 / 02 CONFORME A LA NORME NF D 35-300 ET AUX SPECIFICATIONS COMPLEMENTAIRES DEFINIES PAR LES REGLES...
Page 3
Dear Sir, Madam, Congratulations with your purchase of the Zibro, the number one brand among movable heaters. You have purchased a first-class quality product, which will serve you for many years to come. This, of course, provided you use the heater correctly.
GENERAL DIRECTIONS FOR USE MAIN COMPONENTS Below you will find the main steps to be taken for using your Zibro. For more details, please refer to the Front plate MANUAL (pages 45 ff.). Grid Base plate Lid for removable Remove all packaging materials (Fig. A).
Note: To avoid unexpected shut off, we recommend to put a door or window ajar when the heater is operating. For each Zibro model the minimum size of space is specified in which you can use the heater safely, without additional ventilation (refer to Section Q). If a particular...
MANUAL INSTALLING THE HEATER Carefully remove your Zibro from the box and check the contents. In addition to the heater you also need to have: a manual fuel pump a transportation cap a fuel cap cover these directions for use Keep the box and the packaging materials (Fig.
Check the removable tank fuel gauge while filling the tank (Fig. E). Stop filling by loosening the switch button on top of the pump (turn anti-clock- wise), once the gauge indicates that the tank is full. Never overfill the tank, especially not when the fuel is very cold (fuel expands when it heats up).
The available temperature settings range from 6°C minimum to 28°C maximum. When the heater has been unplugged for more than 10 minutes (or after a power failure), the temperature will reset to the factory setting of 20°C. USING THE TIMER The timer allows you to switch on the heater automatically at a preset time.
- 1 1 Too little ventilation. Ventilate better. (& blinking VENT-light) timer save vent. fuel Always contact your Zibro Kamin dealer for any malfunctioning not listed above. save hour min. extension AUTOMATIC DEACTIVATION This heater is fitted with a safety system that ensures that it switches off room automatically after 50 hours continuous operation.
Switch off the heater and let it cool down, before you start any maintenance work. Also disconnect the plug from the mains. Your Zibro needs hardly any maintenance. It is, however, important that you clean the air filter cap and the vent filter with a vacuum cleaner and the grid with a damp cloth, both on a weekly basis.
We recommend that you remove dust and stains in time with a damp cloth, becau- se otherwise these may cause stains that are hard to remove. Do not remove any heater components yourself. Always contact your Zibro dealer for repairs. When the power cord is damaged, it may only be replaced by an authorised fitter.
WARRANTY PROVISIONS Your heater comes with a 24-month warranty starting on the date of purchase. Within this period all defects in material or workmanship will be repaired without any charge. The following provisions shall apply regarding this warranty: We expressly dismiss all other claims for damages, including consequential damages.
Page 13
key-lock timer save hour min. extension temp. timer save clock vent. fuel room...
Need help?
Do you have a question about the SRE 188 E and is the answer not in the manual?
Questions and answers