Probe Holder; Maintenance; Internal Fuse Test - Fluke 21 Instruction Sheet

Probe Holder

Maintenance

To avoid electric shock, remove the test leads
before opening the case, and close the case before
using the meter. To prevent fire and possible arc-
flash, use fuses with ratings shown on the back of
the meter.
To avoid contamination or static damage, do not
touch the circuit board without proper static
protection.

Internal Fuse Test

RANGE
W Warning
Caution
300 mA
4-8
10 A
OK
<.5
OK
hc14f.eps
OK
OK
hc9f.eps