Fluke Computer Accessories User Manual page 53

User's Guide – version 3.5
dstas_exclude=true – specifies that the supplied destination autonomous system
numbers are excluded rather than included.
as – specifies an acceptable source or destination autonomous system number.
Format as for srcas above.
as_exclude=true – specifies that the supplied source or destination autonomous
system numbers are excluded rather than included.
srcnet – specifies an acceptable source subnet. Note that the subnet mask supplied
by the router is ignored.
<addr>/<mask>
srcnet_exclude=true – specifies that the supplied source subnets are excluded
rather than included.
dstnet – specifies an acceptable destination subnet. Format as for srcnet above.
dstnet_exclude=true – specifies that the supplied destination subnets are excluded
rather than included.
net – specifies an acceptable source or destination subnet. Format as for srcnet
above.
net_exclude=true – specifies that the supplied source or destination subnets are
excluded rather than included.
srcmask – specifies an acceptable source subnet mask, as supplied by the router.
<mask> The mask length, in the range 0-32
srcmask_exclude=true – specifies that the supplied source subnet masks are
excluded rather than included.
dstmask – specifies an acceptable destination subnet mask. Format as for srcmask
above.
dstmask_exclude=true – specifies that the supplied destination subnet masks are
excluded rather than included.
mask – specifies an acceptable source or destination subnet mask. Format as for
srcmask above.
mask_exclude=true – specifies that the supplied source or destination subnet masks
are excluded rather than included.
The subnet, with addr being the network address in dotted-
decimal format and mask being the mask length, in the range
0-32
NetFlow Tracker
53