Table of Contents
Advertisement
User's Guide – version 3.5
edate_nunitsago – (optional) specifies the number of units before the time of report
generation of the last day of the time range.
0
The last day of the time range will be the first day of the unit
following the current unit at the time of report generation
1
The last day of the time range will be the first day of the current
unit at the time of report generation (default)
<number>
The time range will extend to the end of this number of full units
before the time of report generation
stime – specifies the time of day at which the time range starts.
<HH>:<mm>
The time, with <HH> being the hour in the 24-hour clock and <mm>
being the minutes
etime – specifies the time of day at which the time range ends.
<HH>:<mm>
The time, with <HH> being the hour in the 24-hour clock and <mm>
being the minutes
Applying a time-of-day mask to the time range
If the time range is longer than a day, you may wish to restrict it to just certain times
on each day. You can select only working hours or only non-working hours, for
example.
Note that if a long-term report has a configured time zone or mask, this parameter will
have no effect.
timemask – specifies an inclusive mask to apply the to time range. To specify multiple
inclusive masks, include a parameter name and value in the URL for each mask.
<day1>-<day2>/<time1>-<time2>
timemask_exclude=true – specifies that the supplied time masks are excluded from
the time range rather than included in it.
NetFlow Tracker
The range of weekdays and the
times on those weekdays to
include in the mask with a weekday
being one of SUN, MON, TUE, WED,
THU, FRI or SAT, day2 coming on
or after day1 in the list above, a
time being in the 24-hour form
hh:mm, and time2 being after
time1
45
Advertisement
Table of Contents
