Table of Contents
Advertisement
User's Guide – version 3.5
dstport – specifies an acceptable destination application port number. Format as for
srcport above.
dstport_exclude=true – specifies that the supplied destination application port
numbers are excluded rather than included.
srcappl – specifies an acceptable source IP application.
<port>/<name>
<port>/<number>
<port1>-<port2>/<name>
<port1>-<port2>/<number>
<name>
srcappl_exclude=true – specifies that the supplied source applications are excluded
rather than included.
dstappl – specifies an acceptable destination IP application. Format as for srcappl
above.
dstappl_exclude=true – specifies that the supplied destination applications are
excluded rather than included.
appl – specifies an acceptable source or destination IP application. Format as for
srcappl above.
appl_exclude=true – specifies that the supplied source or destination applications
are excluded rather than included.
recappl – specifies an acceptable recognised IP application. Format as for srcappl
above.
recappl_exclude=true – specifies that the supplied recognised applications are
excluded rather than included.
applid – specifies an acceptable identified application.
<name>
The identified application name; see
information
<id>
The identified application identifier
The application, with port being the application
port number in the range 0-65535 and name
being the protocol name, such as TCP or UDP
The application, with port being the application
port number and number being the protocol
number in the range 0-255
A range of application ports, with port1 being
the start of the range, port2 the end and name
being the protocol name
A range of application ports, with port1 being
the start of the range, port2 the end and
number being the protocol number
The name of a
grouped application
Device Settings
NetFlow Tracker
for more
51
Advertisement
Table of Contents
