Fluke Computer Accessories User Manual page 24

User's Guide – version 3.5
Zooming in
You can zoom in to the chart by clicking the zoom in button on the toolbar:
This will zoom in on the centre of the chart. If you want to zoom in on a particular
selection, see Selecting a time range
from automatically refreshing.
Zooming out
You can zoom out from the chart by clicking the zoom out button on the toolbar:
This will zoom out from the centre of the chart and will again stop the chart from
automatically refreshing.
Selecting a time range
If you wish to zoom in on a particular time range you can do so by clicking and dragging
the mouse across the chart. You can then zoom in on the selection using the
toolbar button.
Selecting the entire time range
You can select the entire visible time range using the select all toolbar button:
Examine selected data
Once you have selected a time range
the right mouse button on the selection. A context menu will pop up, allowing you to
create another chart based upon any one of or all of the charted elements during the
selected time range. If the chart is automatically refreshing and you used the
button to select the time range the new chart will also automatically refresh. The types
of chart you can create are described in
View a standard chart as a pie chart
Most charts allow you to open a pie chart of the entire charted time range by clicking
the pie chart toolbar button:
See Working with Pie Charts
View a standard chart as a tabular report
Most charts allow you to open a tabular report of the entire charted time range by
clicking the report toolbar button:
See Working with Tabular Reports
below. Note that zooming in will stop the chart
as above, you can "drill down" into it by clicking
Report Templates
below for more about tabular reports.
below for more about tabular reports.
NetFlow Tracker
zoom in
select all
below.
24