Advertisement
PoWerneT
300 FeATure sTATus LIGHTs
™
Protection on
On: Dual Mode Plus surge protection is active
Off: Dual Mode Plus surge protection is inactive
Your PowerNet device may have sacrificed itself to protect your equipment
from surge damage. It may need to be replaced.
Clean Power on
On: Clean Power noise filtering is active
Off: Clean Power noise filtering not active
Ground oK
On: Electrical wiring is properly grounded
Off: Electrical wiring is not properly grounded. You may need to consult
a professional electrician to install a ground line for your home.
Power/security
On: PowerNet is receiving electrical power
Off: Power off
If the power/security light is off, you may have installed the PowerNet
device on a faulty or switched wall outlet. It is recommended to install
PowerNet devices in outlets that are always on and are not controlled
by a wall switch. Move the PowerNet device to an unswitched outlet,
or turn on power to the outlet.
During Security Key Setup:
Blinking: key set up active
5
On: key set up successful, device linked to network
Double Flash: key set up not successful
ethernet Link
Solid Green: 10/100 Mbps port linked
Blinking: 10/100 Mbps port transmitting or receiving
Off: Ethernet link not active
network speed
The Network Speed light will indicate the overall speed of your network
with three colors.
red
Minimum connection indicates weak signal and slower network speed:
less than 50Mbps
orange
Normal signal with standard network speed: 50-100Mbps
Green
Excellent signal with optimal network speed: 100Mbps+
off
No activity. PowerNet is not connected.
To remedy slow network speed, add additional PowerNet 300s
to your electrical lines to further clean power for improved signal
transfer. You may need to plug appliances and electronics such
as hair dryers into PowerNet 300 to stop introducing noise into
the electrical line.
6
Advertisement
