Table of Contents
Advertisement
ScreenBeam Wireless Display Adapter Kit
The ScreenBeam display software can't launch–it says it can't find a USB
Transmitter. How can I solve this?
First, if the display software doesn't launch, wait about a minute before trying
anything else. Then, unplug and plug the USB Transmitter device back in, and
try launching the display software again. If that doesn't work, open the Windows
Device Manager and make sure the ScreenBeam Transmitter is not disabled (locate
it under "Network").
Why can't I see anything on my TV screen?
If you're not getting a picture on your TV, make sure the ScreenBeam display
adapter is connected, powered on, and the correct TV input (HDMI 1, HDMI 2,
etc.) has been selected.
I cannot detect the ScreenBeam Display Adapter from my laptop com-
puter using the ScreenBeam display software. What's wrong?
First, make sure the ScreenBeam Transmitter is connected to the USB port. Then,
select "Add a receiver" and try again.
My laptop computer displays the following message: "Color scheme has
been changed." Is this a problem?
No. Your laptop color scheme will return to normal once you disconnect from the
ScreenBeam Transmitter.
Why is my laptop computer audio muted once I connect to ScreenBeam
Display Adapter?
It is muted because the audio is now being broadcast to the TV.
Why is the text blurry on the TV when I use the ScreenBeam display
software?
Your TV may not be able to support the resolution sent from your PC. Try chang-
ing your laptop's display resolution to either 1280x720 or 1920x1080.
22
Advertisement
Table of Contents
