Advertisement
Quick Links
Encrypting the HPE 200AVP Ethernet adapters
By default the adapters are NOT encrypted, so if your installation does not require encryption, the
adapters can be installed and used, straight out of the box.
NOTE: To insure connectivity between the adapters, all adapters you wish to network together must
be on the same circuit in your breaker box.
Power
first adapter
after
NOTE: From the moment the security button is released on the first adapter in step 4, you have only
two minutes to press and release the security button on the second adapter and each other adapter
you would like to add to the network. Each adapter's security button must be pressed and released
within the two minutes allowed for the adapters to share the same encryption key, and be able to
communicate.
first adapter
LED Indicators
Red
Orange
Green
You can still maintain a network with different line conditions, but performance will vary.
Resetting an HPE 200AVP Ethernet adapter
The Reset button can be accessed via the small hole on the adapter, next to the Security button.
first adapter
second adapter
first adapter
after
second adapter
link
must
.
second adapter
11/7/2008
Power
Power
Advertisement
