To Replace The Pcb (Pp-208A) - ACR Electronics RCL-600 Trouble Shooting And Parts Replacement Manual

11. Method to replace the PP-208A PCB inside Joystick control.
11-1 Use the following tools
・Phillips head screw driver
・7mm Spanner
・Printed circuit board (PP-208A)
11-2 Replacement procedure
1)
Loosen and remove 4 screws as indicated in picture 35. Open the cover.
2) Remove all the connectors from the printed circuit board as indicated in picture 36.
Picture 35 (Remote control panel CPF99)
Picture 36
25