Mitsubishi CP910E Operation Manual page 24

PRINTING (SPECIAL)
2 2 2 2 2
WHEN SETTING TO MODE : DIFF, IMAGES :4;
Repeat the following procedure to store the set number of images in memory.
1 1 1 1 1
Press DISPLAY button to display the set condition.
2 2 2 2 2
Press MONITOR button and select the source image ("LIVE" is
displayed on the monitor.) to display the image to be stored.
3 3 3 3 3
Press MEMORY button to store the image to be printed.
• For normal setting, when the image is stored, the source image (LIVE image) is
displayed after displaying the stored image about 1 second.
4 4 4 4 4
When selecting the position to store the image, press MEMORY
PAGE button to select the memory page.
{ } [ }
• Press , , ,
• The image is stored in the selected memory page.
• The position number where the image can be stored is indicated in yellow.
2 2 2 2 2
WHEN SETTING TO MODE : SAME, IMAGES : 4;
Only one image will be displayed on the monitor screen.
1 1 1 1 1
Press DISPLAY button to display the set condition.
2 2 2 2 2
Press MONITOR button and select the source image ("LIVE" is
displayed on the monitor.) to display the image to be stored.
3 3 3 3 3
Press MEMORY button to store the image to be printed.
• When the image is stored, the source image (LIVE image) is displayed after
displaying the stored image about 1 second.
(When MEM&MONI : OFF in SERVICE MENU)
4 4 4 4 4
When selecting the memorizing page (A, B, C), press MEMORY
PAGE button to select .
• The position number where the image can be stored is indicated in yellow.
24
button to determine the position to store the image.