Mitsubishi Electric DLP EX321U User Manual page 42

4.
SYSTEM SETUP:
Basic
5.
SYSTEM SETUP:
Advanced
6. INFORMATION
Note that the menu items are available when the projector detects at least one valid signal. If there is no equipment
connected to the projector or no signal detected, limited menu items are accessible.
EN-42
Projector Position
Auto Power Off
Blank Timer
Panel Key Lock
Timer Controller
Splash Screen
Quick Cooling
Audio Settings
Menu Settings
Standby Monitor Out
Lamp Settings
Security Settings
Closed Caption
LAN Control Settings
Reset All Settings
Current System Status
Front Table/Rear Table/Rear Ceiling/
Front Ceiling
Disable/5 min/10 min/15 min/20 min/25
min/30 min
Disable/5 min/10 min/15 min/20 min/25
min/30 min
On/Off
Disable/30 min/1 hr/2 hr/3 hr/4 hr/8 hr/12
hr
Black/Blue/MITSUBISHI
On/Off
Mute On/Off
Volume
Standby Audio Out On/Off
Menu display time 5 sec/10 sec/15 sec/20 sec/25 sec/30 sec
Center/Top-Left/Top-Right/Bottom-Right/
Menu position
Bottom-Left
Off/On
Lamp mode Standard/Low
Reset lamp timer
Equivalent lamp hour
Change password
Power on lock On/Off
Closed Caption
On/Off
Enable
Caption Version CC1/CC2/CC3/CC4
Control By RS-232C/LAN
PJLink Certification
On/Off
(EX321U only)
Change PJLink Password (EX321U only)
DHCP On/Off
IP Address
Subnet Mask
Default Gateway
DNS Server
Apply
Source
Setting
Resolution
Color System
Equivalent Lamp Hour