Mitsubishi Electric DLP EX321U User Manual page 3

Hide thumbs Also See for DLP EX321U:
Table of Contents

Advertisement

Note: This symbol mark is for EU
countries only.
This symbol mark is according to
the directive 2002/96/EC Article 10
Information for users and Annex
IV, and/or to the directive 2006/66/
EC Article 20 Information for end-
users and Annex II.
WARNING
• If the projector comes with a lens cap, please note that the lens cap
is for protecting the lens. If you leave the lens cap on the lens with
the projector turned on, it may be deformed because of heat build-
up. Remove the lens cap when you turn on the projector.
• One of power cords for the U.S., EU/Indonesia, U.K., Australia,
South Korea and Argentina is provided appropriately.
• This projector uses the power plug of three-pin grounding type. Do
not remove the grounding pin from the power plug. If the power plug
doesn't fit your wall outlet, ask an electrician to change the wall out-
let.
• In case that the power cord for the U.S. is provided with this projec-
tor, never connect this cord to any outlet or power supply using other
voltages or frequencies than rated. If you want to use a power sup-
ply using other voltage than rated, prepare an appropriate power
cord separately.
• Use 100-240 V AC 50/60 Hz to prevent fire or electric shock.
Your MITSUBISHI ELECTRIC product is designed and manufactured with high quality
materials and components which can be recycled and/or reused.
This symbol means that electrical and electronic equipment, batteries and accumula-
tors, at their end-of-life, should be disposed of separately from your household waste.
If a chemical symbol is printed beneath the symbol shown above, this chemical sym-
bol means that the battery or accumulator contains a heavy metal at a certain concen-
tration. This will be indicated as follows:
Hg: mercury (0,0005%), Cd: cadmium (0,002%), Pb: lead (0,004%)
In the European Union there are separate collection systems for used electrical and
electronic products, batteries and accumulators.
Please, dispose of this equipment, batteries and accumulators correctly at your local
community waste collection/recycling centre.
Please, help us to conserve the environment we live in!
• Do not place any objects on the power cord or do not place the pro-
jector near heat sources to prevent damage to the power cord. If the
power cord should be damaged, contact your dealer for replace-
ment because it may cause fire or electric shock.
• Do not modify or alter the power cord. If the power cord is modified
or altered, it may cause fire or electric shock.
EN-3

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ex241u

Table of Contents