ACR Electronics RCL-100D Product Support Manual page 8

Figure 3 - URP-102 Point Pad™ Functions
URP-102 Point Pad Functions

Press the ON/OFF button to turn the lights ON or OFF.

Press the SPEED button to toggle between High and Low rotation
speeds.

Press the Right or Left Arrows to rotate the Searchlight in that
direction.

Press the Up or Down Arrows to raise or lower the Searchlight-
beam.

To activate the XRCiZ™ feature, press and hold the ON/OFF
button for greater than 5 seconds. The green LED indicates XRCiZ™
feature is enabled.

To deactivate the XRCiZ™ feature, Press and hold the ON/OFF
button for greater than 5 seconds. The red LED indicates XRCiZ™
feature is disabled.

An LED blinking red / green indicates that the XRCiZ™ feature is
now "exercising" the Searchlight.
NOTE: XRCiZ™ feature is only available when paired with a URC-
102 Master Controller.
Y1-03-0138U
8