ACR Electronics PLB-350C Product Support Manual page 22

406 mhz personal locator beacons
Hide thumbs Also See for PLB-350C:
Table of Contents

Advertisement

GPS
This message appears only if GPS data was acquired
121.5
The system reports that the 121.5 MHz homing signal is on. Search and
Rescue (SAR) personnel use this frequency when arriving close to the scene.
If this message is accompanied by a green LED flash, the GPS coordinates
have been sent. If accompanied by a red LED flash, the GPS coordinates
have not been sent.
NOTE: If GPS coordinates were not sent, the system will continue to attempt
to acquire the data and add it to the 406 MHz distress signal when available.
Updated GPS coordinates are sent every twenty minutes.
GPS
The system reports recently acquired GPS coordinates. You may be able to
communicate the coordinates to SAR or other persons assisting in the rescue.
The green LED flash indicates that GPS coordinates have been sent.
Coordinates will scroll from right to left with the following information: LT: XXº
XX.XX‟,N and LG: XXXº XX.XX‟,W
GPS
GIVE
R
The system alerts you that the GPS coordinates have not been acquired and
therefore have not been sent.
The system reminds you that GPS data acquisition is optimized by giving the
beacon a clear view of the sky.
Y1-03-0244E
SENT
ON
XX.XXX'
DATA
WEAK
CLEAR
G
G
R
VIEW
G
TO
SKY
22

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents