Using Remote Desktop - Mitsubishi Electric DLP WD390U-EST User Manual

Hide thumbs Also See for DLP WD390U-EST:
Table of Contents

Advertisement

Advanced display utilities (continued)
• About
Displays the version information of the LAN
Display System.
• Exit
Exits the LAN Display System.
Important:
• The items marked with "*" are not available for
Mac OS X.
• When "Advanced Screen Capture" is enabled,
the computer mouse cursor may blink.
Ending the LAN Display projection
5. Click the Exit button on the main user interface or
the menu window to exit the LAN Display System.
6. In case of the wireless LAN communication, unplug
the USB wireless LAN adapter from the projector.
Before unplugging, be sure to press the UNPLUG
button on the remote control and select [Yes] on
the screen by pressing the  or  button and then
ENTER button.
Important:
• Do not switch the input source to USB Display
or PC Less Presentation during the wireless LAN
communication. If switched, the communication
will be disconnected.
• During wireless LAN communication, the projector
cannot communicate with the access point.
• Only infrastructure mode is available to wireless
LAN communication. Adhoc mode is not available.
Installing the virtual display driver
To project a virtual extended screen, install the Virtual
display driver as follows.
1. Double-click "Virtual display driver.exe" contained
in "C:¥Program Files¥LAN Display System", and
start up the installer of the Virtual display driver.
2. The Setup window is displayed. Click [Next]
and operate according to the instructions on the
window.
3. When the installation has been completed, restart
the computer.

Using remote desktop

Connect an USB device such as a mouse or keyboard
to the USB-A terminal on the projector. While the
computer images are projected with the LAN Display,
the computer can be operated with the device.
Important:
• The USB-A terminal on this projector is compatible
with USB 2.0.
• Supported USB device is standard USB HID device
with power consumption less than 5V/500mA.
• When using a keyboard and mouse together, we
recommend a commercially available wireless
keyboard and wireless mouse intended for a
computer with wireless receiver.
• When using a USB hub, you are recommended to
use the one with external power supply.
• Some USB hubs cannot be used depending on the
specifications.
EN-47
AUDIO
AUDIO IN-3L
S-VIDEO
SERIAL
COMPUTER / COMPONENT VIDEO
USB-A
LAN
USB-B
IN-1
IN-1
AUDIO OUT
AUDIO
IN-2
AUDIO IN-3R
IN-2
MONITOR OUT
VIDEO
To USB-A
terminal

Advertisement

Table of Contents
loading

Table of Contents