Usb Display - Mitsubishi Electric DLP WD390U-EST User Manual

Advanced display utilities (continued)

USB Display

You can project the computer images inputted via a
USB connection.
Supported OS's are as follows:
• Windows XP
• Windows Vista
• Windows 7
• Windows Server 2008 R2
• Windows MultiPoint Server
• Mac OS X 10.5 or later
Important:
• You need to install the driver only when using MAC
OS X.
• Mac computers based on the PowerPC processors
are not supported.
• Only 1-to-1 screen projection is supported.
• Moving images cannot be displayed.
Connection
Connect the projector and the computer using a
commercially available USB cable.
AUDIO AUDIO IN-3L
IN-1
AUDIO OUT
AUDIO
IN-2
AUDIO IN-3R
Computer
Important:
• The USB-B terminal on this projector is compatible
with USB 2.0.
• Do not use a USB hub between the projector and
the computer.
COMPUTER / COMPONENT VIDEO
S-VIDEO SERIAL
USB-A LAN
USB-B
IN-1
IN-2
MONITOR OUT
VIDEO
USB 4-pin
To USB-B
(type B)
terminal
USB 4-pin
USB cable
(type A)
(option)
To USB port
Installation of driver
When using Mac OS X, install the driver after
connecting the projector and the computer using a
USB cable for the first time. Once you have installed
the driver, you don't need to install it again.
Installing USB Display driver
1. Via the Finder, open [USB_DISPLAY] and double-
click [USB Display.pkg].
2. Follow the on-screen instructions to install the
driver.
When deleting USB Display driver (Uninstallation)
1. Via the Finder, open the [Applications] folder and
double-click the [USB Display] folder.
2. Double-click [UninstallVendorSpecificType05].
3. Follow the on-screen instructions to uninstall the
driver.
EN-43