Fisher-Price SUPER TALK! 76960 Owner's Manual & Assembly Instructions page 14

16
T-Loop
Fastener End
• Insert each fastener end of the long seat belt strap
through a slot in the center of the seat. Make sure the
fasteners face the outer edge of the seat.
• Pull each side of the long seat belt strap evenly through
the slots. Make sure to pull each T-loop through a slot.
• Turn the seat upright.
17
Seat Back Tabs
3
Slot
• With the seat at an angle, insert the tabs on the front
edge of the seat into the slots in the foot-well wall
• Push down firmly on the edge of the seat above each
tab to snap the tabs into the slots
• Rotate the back of the seat down
back tabs into the slots in the vehicle body. Push down
firmly on the seat back.
Long Seat Belt Strap
Seat
Tabs
PUSH
HERE
2
1
.
2
to snap the seat
3
Assembly
18
• Insert a #8 x 1" screw into the rear of seat as shown.
• Tighten the screw with a Phillips screwdriver. Do not
over-tighten.
19
• Position the sport bar on its side so that the sport bar
ends curve away from you.
.
1
• Position the canopy opposite the sport bar with the
netting facing away from you.
• Slide the four canopy sleeves onto the sport bar.
14
#8 x 1" Screw
Canopy Sleeves
Canopy
Sport Bar
Canopy
Sleeves