Battery Installation - Fisher-Price POWER WHEELS W4715 Owner's Manual & Assembly Instructions

IMPORTANT! Use only a Power Wheels
Use of any other battery will damage your vehicle.
1
• Press the tab under the back edge of the seat and lift
to remove the seat.
Motor Harness
Connector
2
• Lift the battery retainer to access the battery compartment.
• Place the battery upright in the battery compartment.
• Plug the motor harness connector into the battery.
Push firmly.

BATTERY INSTALLATION

® 12 volt battery.
Seat
Battery
®
Power Wheels
Retainer
12 Volt Battery
3
• Carefully lower the battery into the battery compartment.
The battery retainer slides over the battery to secure it.
Seat
B
4
• Fit the tab at the front of the seat into the slot below
the drive buttons
• "Snap" the tab at the back of the seat into the slot
near the rear of the vehicle
11
Battery Retainer
Drive Buttons
A
.
A
.
B
00989pr-1056