Front View - Fisher-Price POWER WHEELS W4715 Owner's Manual & Assembly Instructions

Front Axle
9
7
• Slide a / " (1,1 cm) washer onto the front axle.
16
• Slide a bushing, ring end first, onto the front axle.
• Locate a front wheel. Slide the wheel, flat side first,
onto the front axle.
• Slide a wheel cover, indented side out, onto the front axle.
• Repeat this procedure on the other side of the vehicle.
10
• Fit a 3 / " (1 cm) - 16 hex nut onto each end of the front
8
axle. Tighten both hex nuts with the wrench.
Hubcaps
11
• "Snap" a hubcap onto the center of each wheel cover.
• Turn the vehicle upright.
ASSEMBLY
Front Wheel
Washer
(Flat Side First)
Bushing
(Ring End First)
Wheel Cover
(Indented Side Out)
3 / " (1 cm) -16 Hex Nut
8
Wrench
Hubcaps
Front Clip
12

FRONT VIEW

• Fit the front clip onto the front of the vehicle, as shown.
Hint: The front clip may be factory assembled.
Brush Guard
13
• Fit the brush guard onto the front clip.
• Insert two #8 x 3 / " (1,9 cm) screws into the lower
4
holes in the brush guard and tighten.
9
00989pr-1056