Table of Contents
Advertisement
WARNING
Children can be harmed by small
parts, sharp edges and sharp points
in the vehicle's unassembled state,
or by electrical items. Care should be
taken in unpacking and assembly of
the vehicle. Children should not handle
parts, including the battery, or help in
assembly of the vehicle.
#10 x
Dash
Motor Harness
Connector Wire
1
FRONT VIEW
•
Position the dash on the vehicle.
•
Make sure the motor harness connector wire is
through the groove in the dash. Insert five #10 x ¾"
screws and tighten.
T6137pr-0920
Assembly
3
/
" Screws
4
17
2
DASH VIEW
•
Before applying labels, wipe the surface of the vehicle
with a clean, dry cloth to remove any dust or oils.
•
Place the labels exactly as shown in the illustration.
•
For best results, avoid repositioning a label once it has
been applied to the vehicle.
Key Assembly
3
•
Insert and
"snap" the key assembly into the opening
in the dash, as shown.
8
2
18
Dash
Advertisement
Table of Contents
