15
FRONT VIEW
•
Using safety scissors, cut the plastic tie holding Map
in the clip.
•
Fit the clip to the windshield.
•
Insert a #10 x ¾" screw into the clip and tighten.
•
Replace Map into the clip.
Note to retailer: Do not remove the plastic tie. Simply
remove Map from the clip. Assemble the clip to the
windshield and replace Map in the clip.
T6137pr-0920
ASSEMBLY
Map
Map Clip
Backpack
Backpack
Holder
16
SIDE VIEW
•
Using safety scissors, cut the plastic tie holding
Backpack in the holder. Remove Backpack from
the holder.
Note to retailer: Do not remove the plastic tie. Simply
lift Backpack from the holder and assemble the holder
to the top edge of the vehicle. Replace Backpack in
the holder.
•
Fit the holder to the top edge of the vehicle, as shown.
•
Insert two #10 x ¾" screws into the holder. Tighten the
screws.
12