Battery Installation 1,5V x 4 “AA” (LR6) • Locate the battery compartment door on the mobile hub. • Loosen the screws in the battery compartment door with a Phillips screwdriver. Remove the battery compartment door. • Insert four “AA” (LR6) alkaline batteries. Hint: We recommend using alkaline batteries for longer battery life.
Page 5
Tube • Insert and "snap" the tubes into the hub. Tube • Lay the mat on a flat surface with the decorated side up. • Insert the end of each tube through the largest loops on the outside edge of the mat. Setup •...
Page 6
Motorized Mobile with Music & Lights! Power/Volume Mode Switch • Slide the power/volume switch on the hub to ON with low volume , or ON with high volume • Slide the mode switch to Music and Lights or Music and Motion. •...