Table of Contents
Advertisement
Raise the PC card eject button only when you need to push it. The eject
button may get knocked off the computer if it is not pushed down. In this
case, replace the button while the inserted PC card is held in.
When a new card is correctly inserted, the appropriate driver is
automatically installed. If the driver is not installed correctly, you will
hear a warning beep. In this case, install the PC card driver by following
4
the instructions on the screen.
Ejecting PC Card
Some PC cards may become hot after long use.
Be sure to use the procedure below when ejecting a PC card.
Otherwise, the system may not work properly.
1.
In the PC Card Properties dialog box, click on the icon of the PC card you
want to eject.
2.
Click Stop.
3.
When the message prompts you to eject the card, click OK.
4.
Gently push in the PC card eject button. The PC card will be pushed out
slightly.
5.
Remove the card, and re-insert the protection card.
6.
Fold down the eject button.
4-4
Advertisement
Table of Contents
