Sharp PC-A290 Manual page 42

Resuming from Standby
Do not operate the keyboard, glide pad or mouse while the system is
resuming from Standby.
Your computer resumes from Standby in each of the following cases:
You press any key.
The screen cover is opened.
The built-in modem receives a call while a communication software is running
(the built-in modem may not be available in some countries).
Resuming from Hibernation
Do not operate the keyboard, glide pad or mouse while the system is
resuming from Hibernation.
If sufficient battery power does not remain, your computer will not resume
from Hibernation. To resume it, connect the computer to AC power.
When the system resumes from Hibernation, you may see some flicker on
the display. This is not a malfunction.
Your computer resumes from Hibernation if you press the power switch.
Disabling Power Management
1. In the Power Management Properties dialog box, select Power Schemes tab.
2. Set System standby, Turn off monitor and Turn off hard disks to Never, and
click OK.
When you are using communication software or if sound or voice pauses
or skips while played back, disable power management.
Battery Alarm
In Windows 98, the alarm will tell you when the battery drops to the specified level
by sounding an alarm or displaying a message, and let your computer go on System
standby or be shut down automatically.
3
3-11