Pc Card; Inserting Pc Card - Sharp PC-A250 Operation Manual

PC Card

Your computer is equipped with a PC card (PCMCIA) slot, which can
accommodate one Type II card. Before inserting a PC card into your computer. see
its manual.
When using a PC card which needs an IRQ, disable one of the following ports:
Serial, IR, LPT, or LAN. Otherwise a PC card or the computer may malfunction.
Never disable the USB port. Disabling the USB port in the Setup Utilit>
may cause some PC cards to malfunction.
I

Inserting PC Card

1.
Raise the PC card eject button and push it in. The protection card
2. Remove the protection card from the PC card slot.
3.
Insert the card into the slot with the label face up until it locks into place.
(You do not have to power down the computer to insert/remove PC cards
when using Windows 98). The PC card eject button pops out. When the PC
card is fully inserted, fold down the PC card eject button.
out.
4-3