Disabling Power Management - Sharp PC-A250 Operation Manual

resume from the suspend-to-disk mode. To resume it from the .suspentl-
to-disk mode, connect the computer to AC poM?r,
If a PC card does not work properly after Four computer resumes from
l
the Suspend to Disk, restart the computer.
When entering or resuming from a suspend mode. be .ruce to obseme the
f o/lowing precautions. Otherwise, the computer may not operate
I
correctly after it has resumed j?om the suspend mode.
Do not turn off the computer when the system is suspended to RAM.
l
The RAM contents will be lost.
Do not operate the keyboard, glide pad or mouse while the system is
l
entering or.resuming from a suspend mode.

Disabling Power Management

In Windows 99
I. In the
Power Management Properties
Set
2. System Standby, Turn off monitor
click
OK.
In the Setup Utility
1. In the
Power
Set
Hard Disk Power Down after, Video Power Down qjier
2.
to
Disabled.
Set
3. Power Management Function
When you are using communication software or if sound or \,oicr pauses
or skips while played back, disable power management.
menu, set
Power Management Function
to
dialog box. select
Power Schemes
and
Turn off harddisks
to
Enabled.
Disabled.
tab.
to and
and
Auto Suspend